Kernel driver max16601¶
Supported chips:
Maxim MAX16508
Prefix: ‘max16508’
Addresses scanned: -
Datasheet: Not published
Maxim MAX16601
Prefix: ‘max16601’
Addresses scanned: -
Datasheet: Not published
Author: Guenter Roeck <linux@roeck-us.net>
Description¶
This driver supports the MAX16508 VR13 Dual-Output Voltage Regulator as well as the MAX16601 VR13.HC Dual-Output Voltage Regulator chipsets.
The driver is a client driver to the core PMBus driver. Please see Kernel driver pmbus for details on PMBus client drivers.
Usage Notes¶
This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see How to instantiate I2C devices for details.
Platform data support¶
The driver supports standard PMBus driver platform data.
Sysfs entries¶
The following attributes are supported.
in1_label |
“vin1” |
in1_input |
VCORE input voltage. |
in1_alarm |
Input voltage alarm. |
in2_label |
“vout1” |
in2_input |
VCORE output voltage. |
in2_alarm |
Output voltage alarm. |
curr1_label |
“iin1” |
curr1_input |
VCORE input current, derived from duty cycle and output current. |
curr1_max |
Maximum input current. |
curr1_max_alarm |
Current high alarm. |
curr[P+2]_label |
“iin1.P” |
curr[P+2]_input |
VCORE phase P input current. |
curr[N+2]_label |
“iin2” |
curr[N+2]_input |
VCORE input current, derived from sensor element. ‘N’ is the number of enabled/populated phases. |
curr[N+3]_label |
“iin3” |
curr[N+3]_input |
VSA input current. |
curr[N+4]_label |
“iout1” |
curr[N+4]_input |
VCORE output current. |
curr[N+4]_crit |
Critical output current. |
curr[N+4]_crit_alarm |
Output current critical alarm. |
curr[N+4]_max |
Maximum output current. |
curr[N+4]_max_alarm |
Output current high alarm. |
curr[N+P+5]_label |
“iout1.P” |
curr[N+P+5]_input |
VCORE phase P output current. |
curr[2*N+5]_label |
“iout3” |
curr[2*N+5]_input |
VSA output current. |
curr[2*N+5]_highest |
Historical maximum VSA output current. |
curr[2*N+5]_reset_history |
Write any value to reset curr21_highest. |
curr[2*N+5]_crit |
Critical output current. |
curr[2*N+5]_crit_alarm |
Output current critical alarm. |
curr[2*N+5]_max |
Maximum output current. |
curr[2*N+5]_max_alarm |
Output current high alarm. |
power1_label |
“pin1” |
power1_input |
Input power, derived from duty cycle and output current. |
power1_alarm |
Input power alarm. |
power2_label |
“pin2” |
power2_input |
Input power, derived from input current sensor. |
power3_label |
“pout” |
power3_input |
Output power. |
temp1_input |
VCORE temperature. |
temp1_crit |
Critical high temperature. |
temp1_crit_alarm |
Chip temperature critical high alarm. |
temp1_max |
Maximum temperature. |
temp1_max_alarm |
Chip temperature high alarm. |
temp2_input |
TSENSE_0 temperature |
temp3_input |
TSENSE_1 temperature |
temp4_input |
TSENSE_2 temperature |
temp5_input |
TSENSE_3 temperature |
temp6_input |
VSA temperature. |
temp6_crit |
Critical high temperature. |
temp6_crit_alarm |
Chip temperature critical high alarm. |
temp6_max |
Maximum temperature. |
temp6_max_alarm |
Chip temperature high alarm. |