Kernel driver lm70

Supported chips:

• National Semiconductor LM70

  Datasheet: http://www.national.com/pf/LM/LM70.html

• Texas Instruments TMP121/TMP123

  Information: http://focus.ti.com/docs/prod/folders/print/tmp121.html

• Texas Instruments TMP122/TMP124

  Information: https://www.ti.com/product/tmp122

• National Semiconductor LM71

  Datasheet: https://www.ti.com/product/LM71

• National Semiconductor LM74

  Datasheet: https://www.ti.com/product/LM74

Author:

Kaiwan N Billimoria <kaiwan@designergraphix.com>

Description

This driver implements support for the National Semiconductor LM70 temperature sensor.

The LM70 temperature sensor chip supports a single temperature sensor. It communicates with a host processor (or microcontroller) via an SPI/Microwire Bus interface.

Communication with the LM70 is simple: when the temperature is to be sensed, the driver accesses the LM70 using SPI communication: 16 SCLK cycles comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2’s complement digital temperature (sent via the SIO line), is available in the driver for interpretation. This driver makes use of the kernel’s in-core SPI support.

As a real (in-tree) example of this “SPI protocol driver” interfacing with a “SPI master controller driver”, see drivers/spi/spi_lm70llp.c and its associated documentation.

The LM74 and TMP121/TMP122/TMP123/TMP124 are very similar; main difference is 13-bit temperature data (0.0625 degrees celsius resolution).

The TMP122/TMP124 also feature configurable temperature thresholds.

The LM71 is also very similar; main difference is 14-bit temperature data (0.03125 degrees celsius resolution).

Thanks to

Jean Delvare <jdelvare@suse.de> for mentoring the hwmon-side driver development.