Kernel driver max16064

Supported chips:

• Maxim MAX16064

  Prefix: ‘max16064’

  Addresses scanned: -

  Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf

Author: Guenter Roeck <linux@roeck-us.net>

Description

This driver supports hardware monitoring for Maxim MAX16064 Quad Power-Supply Controller with Active-Voltage Output Control and PMBus Interface.

The driver is a client driver to the core PMBus driver. Please see Kernel driver pmbus for details on PMBus client drivers.

Usage Notes

This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see How to instantiate I2C devices for details.

Platform data support

The driver supports standard PMBus driver platform data.

Sysfs entries

The following attributes are supported. Limits are read-write; all other attributes are read-only.

in[1-4]_label	“vout[1-4]”
in[1-4]_input	Measured voltage. From READ_VOUT register.
in[1-4]_min	Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
in[1-4]_max	Maximum voltage. From VOUT_OV_WARN_LIMIT register.
in[1-4]_lcrit	Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
in[1-4]_crit	Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in[1-4]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
in[1-4]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.
in[1-4]_lcrit_alarm	Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
in[1-4]_crit_alarm	Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
in[1-4]_highest	Historical maximum voltage.
in[1-4]_reset_history	Write any value to reset history.
temp1_input	Measured temperature. From READ_TEMPERATURE_1 register.
temp1_max	Maximum temperature. From OT_WARN_LIMIT register.
temp1_crit	Critical high temperature. From OT_FAULT_LIMIT register.
temp1_max_alarm	Chip temperature high alarm. Set by comparing READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING status is set.
temp1_crit_alarm	Chip temperature critical high alarm. Set by comparing READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT status is set.
temp1_highest	Historical maximum temperature.
temp1_reset_history	Write any value to reset history.