-mhard-float-msoft-float- Use (do not use) the hardware floating-point instructions and registers
for floating-point operations. When -msoft-float is specified,
functions in libgcc.a are used to perform floating-point
operations. When -mhard-float is specified, the compiler
generates IEEE floating-point instructions. This is the default.
-mhard-dfp-mno-hard-dfp- Use (do not use) the hardware decimal-floating-point instructions for
decimal-floating-point operations. When -mno-hard-dfp is
specified, functions in libgcc.a are used to perform
decimal-floating-point operations. When -mhard-dfp is
specified, the compiler generates decimal-floating-point hardware
instructions. This is the default for -march=z9-ec or higher.
-mlong-double-64-mlong-double-128- These switches control the size of
long double type. A size
of 64 bits makes the long double type equivalent to the double
type. This is the default.
-mbackchain-mno-backchain- Store (do not store) the address of the caller's frame as backchain pointer
into the callee's stack frame.
A backchain may be needed to allow debugging using tools that do not understand
DWARF call frame information.
When -mno-packed-stack is in effect, the backchain pointer is stored
at the bottom of the stack frame; when -mpacked-stack is in effect,
the backchain is placed into the topmost word of the 96/160 byte register
save area.
In general, code compiled with -mbackchain is call-compatible with
code compiled with -mmo-backchain; however, use of the backchain
for debugging purposes usually requires that the whole binary is built with
-mbackchain. Note that the combination of -mbackchain,
-mpacked-stack and -mhard-float is not supported. In order
to build a linux kernel use -msoft-float.
The default is to not maintain the backchain.
-mpacked-stack-mno-packed-stack- Use (do not use) the packed stack layout. When -mno-packed-stack is
specified, the compiler uses the all fields of the 96/160 byte register save
area only for their default purpose; unused fields still take up stack space.
When -mpacked-stack is specified, register save slots are densely
packed at the top of the register save area; unused space is reused for other
purposes, allowing for more efficient use of the available stack space.
However, when -mbackchain is also in effect, the topmost word of
the save area is always used to store the backchain, and the return address
register is always saved two words below the backchain.
As long as the stack frame backchain is not used, code generated with
-mpacked-stack is call-compatible with code generated with
-mno-packed-stack. Note that some non-FSF releases of GCC 2.95 for
S/390 or zSeries generated code that uses the stack frame backchain at run
time, not just for debugging purposes. Such code is not call-compatible
with code compiled with -mpacked-stack. Also, note that the
combination of -mbackchain,
-mpacked-stack and -mhard-float is not supported. In order
to build a linux kernel use -msoft-float.
The default is to not use the packed stack layout.
-msmall-exec-mno-small-exec- Generate (or do not generate) code using the
bras instruction
to do subroutine calls.
This only works reliably if the total executable size does not
exceed 64k. The default is to use the basr instruction instead,
which does not have this limitation.
-m64-m31- When -m31 is specified, generate code compliant to the
GNU/Linux for S/390 ABI. When -m64 is specified, generate
code compliant to the GNU/Linux for zSeries ABI. This allows GCC in
particular to generate 64-bit instructions. For the ‘s390’
targets, the default is -m31, while the ‘s390x’
targets default to -m64.
-mzarch-mesa- When -mzarch is specified, generate code using the
instructions available on z/Architecture.
When -mesa is specified, generate code using the
instructions available on ESA/390. Note that -mesa is
not possible with -m64.
When generating code compliant to the GNU/Linux for S/390 ABI,
the default is -mesa. When generating code compliant
to the GNU/Linux for zSeries ABI, the default is -mzarch.
-mhtm-mno-htm- The -mhtm option enables a set of builtins making use of
instructions available with the transactional execution facility
introduced with the IBM zEnterprise EC12 machine generation
S/390 System z Built-in Functions.
-mhtm is enabled by default when using -march=zEC12.
-mvx-mno-vx- When -mvx is specified, generate code using the instructions
available with the vector extension facility introduced with the IBM
z13 machine generation.
This option changes the ABI for some vector type values with regard to
alignment and calling conventions. In case vector type values are
being used in an ABI-relevant context a GAS ‘.gnu_attribute’
command will be added to mark the resulting binary with the ABI used.
-mvx is enabled by default when using -march=z13.
-mzvector-mno-zvector- The -mzvector option enables vector language extensions and
builtins using instructions available with the vector extension
facility introduced with the IBM z13 machine generation.
This option adds support for ‘vector’ to be used as a keyword to
define vector type variables and arguments. ‘vector’ is only
available when GNU extensions are enabled. It will not be expanded
when requesting strict standard compliance e.g. with -std=c99.
In addition to the GCC low-level builtins -mzvector enables
a set of builtins added for compatibility with AltiVec-style
implementations like Power and Cell. In order to make use of these
builtins the header file vecintrin.h needs to be included.
-mzvector is disabled by default.
-mmvcle-mno-mvcle- Generate (or do not generate) code using the
mvcle instruction
to perform block moves. When -mno-mvcle is specified,
use a mvc loop instead. This is the default unless optimizing for
size.
-mdebug-mno-debug- Print (or do not print) additional debug information when compiling.
The default is to not print debug information.
-march=cpu-type- Generate code that runs on cpu-type, which is the name of a
system representing a certain processor type. Possible values for
cpu-type are ‘z900’/‘arch5’, ‘z990’/‘arch6’,
‘z9-109’, ‘z9-ec’/‘arch7’, ‘z10’/‘arch8’,
‘z196’/‘arch9’, ‘zEC12’, ‘z13’/‘arch11’,
‘z14’/‘arch12’, and ‘native’.
The default is -march=z900. ‘g5’/‘arch3’ and
‘g6’ are deprecated and will be removed with future releases.
Specifying ‘native’ as cpu type can be used to select the best
architecture option for the host processor.
-march=native has no effect if GCC does not recognize the
processor.
-mtune=cpu-type- Tune to cpu-type everything applicable about the generated code,
except for the ABI and the set of available instructions.
The list of cpu-type values is the same as for -march.
The default is the value used for -march.
-mtpf-trace-mno-tpf-trace- Generate code that adds (does not add) in TPF OS specific branches to trace
routines in the operating system. This option is off by default, even
when compiling for the TPF OS.
-mfused-madd-mno-fused-madd- Generate code that uses (does not use) the floating-point multiply and
accumulate instructions. These instructions are generated by default if
hardware floating point is used.
-mwarn-framesize=framesize- Emit a warning if the current function exceeds the given frame size. Because
this is a compile-time check it doesn't need to be a real problem when the program
runs. It is intended to identify functions that most probably cause
a stack overflow. It is useful to be used in an environment with limited stack
size e.g. the linux kernel.
-mwarn-dynamicstack- Emit a warning if the function calls
alloca or uses dynamically-sized
arrays. This is generally a bad idea with a limited stack size.
-mstack-guard=stack-guard-mstack-size=stack-size- If these options are provided the S/390 back end emits additional instructions in
the function prologue that trigger a trap if the stack size is stack-guard
bytes above the stack-size (remember that the stack on S/390 grows downward).
If the stack-guard option is omitted the smallest power of 2 larger than
the frame size of the compiled function is chosen.
These options are intended to be used to help debugging stack overflow problems.
The additionally emitted code causes only little overhead and hence can also be
used in production-like systems without greater performance degradation. The given
values have to be exact powers of 2 and stack-size has to be greater than
stack-guard without exceeding 64k.
In order to be efficient the extra code makes the assumption that the stack starts
at an address aligned to the value given by stack-size.
The stack-guard option can only be used in conjunction with stack-size.
-mhotpatch=pre-halfwords,post-halfwords- If the hotpatch option is enabled, a “hot-patching” function
prologue is generated for all functions in the compilation unit.
The funtion label is prepended with the given number of two-byte
NOP instructions (pre-halfwords, maximum 1000000). After
the label, 2 * post-halfwords bytes are appended, using the
largest NOP like instructions the architecture allows (maximum
1000000).
If both arguments are zero, hotpatching is disabled.
This option can be overridden for individual functions with the
hotpatch attribute.