Generic System Interconnect Subsystem

Introduction

This framework is designed to provide a standard kernel interface to control the settings of the interconnects on an SoC. These settings can be throughput, latency and priority between multiple interconnected devices or functional blocks. This can be controlled dynamically in order to save power or provide maximum performance.

The interconnect bus is hardware with configurable parameters, which can be set on a data path according to the requests received from various drivers. An example of interconnect buses are the interconnects between various components or functional blocks in chipsets. There can be multiple interconnects on an SoC that can be multi-tiered.

Below is a simplified diagram of a real-world SoC interconnect bus topology.

+----------------+    +----------------+
| HW Accelerator |--->|      M NoC     |<---------------+
+----------------+    +----------------+                |
                        |      |                    +------------+
 +-----+  +-------------+      V       +------+     |            |
 | DDR |  |                +--------+  | PCIe |     |            |
 +-----+  |                | Slaves |  +------+     |            |
   ^ ^    |                +--------+     |         |   C NoC    |
   | |    V                               V         |            |
+------------------+   +------------------------+   |            |   +-----+
|                  |-->|                        |-->|            |-->| CPU |
|                  |-->|                        |<--|            |   +-----+
|     Mem NoC      |   |         S NoC          |   +------------+
|                  |<--|                        |---------+    |
|                  |<--|                        |<------+ |    |   +--------+
+------------------+   +------------------------+       | |    +-->| Slaves |
  ^  ^    ^    ^          ^                             | |        +--------+
  |  |    |    |          |                             | V
+------+  |  +-----+   +-----+  +---------+   +----------------+   +--------+
| CPUs |  |  | GPU |   | DSP |  | Masters |-->|       P NoC    |-->| Slaves |
+------+  |  +-----+   +-----+  +---------+   +----------------+   +--------+
          |
      +-------+
      | Modem |
      +-------+

Terminology

Interconnect provider is the software definition of the interconnect hardware. The interconnect providers on the above diagram are M NoC, S NoC, C NoC, P NoC and Mem NoC.

Interconnect node is the software definition of the interconnect hardware port. Each interconnect provider consists of multiple interconnect nodes, which are connected to other SoC components including other interconnect providers. The point on the diagram where the CPUs connect to the memory is called an interconnect node, which belongs to the Mem NoC interconnect provider.

Interconnect endpoints are the first or the last element of the path. Every endpoint is a node, but not every node is an endpoint.

Interconnect path is everything between two endpoints including all the nodes that have to be traversed to reach from a source to destination node. It may include multiple master-slave pairs across several interconnect providers.

Interconnect consumers are the entities which make use of the data paths exposed by the providers. The consumers send requests to providers requesting various throughput, latency and priority. Usually the consumers are device drivers, that send request based on their needs. An example for a consumer is a video decoder that supports various formats and image sizes.

Interconnect providers

Interconnect provider is an entity that implements methods to initialize and configure interconnect bus hardware. The interconnect provider drivers should be registered with the interconnect provider core.

struct icc_node_data

icc node data

Definition

struct icc_node_data {
  struct icc_node *node;
  u32 tag;
};

Members

node

icc node

tag

tag

struct icc_onecell_data

driver data for onecell interconnect providers

Definition

struct icc_onecell_data {
  unsigned int num_nodes;
  struct icc_node *nodes[];
};

Members

num_nodes

number of nodes in this device

nodes

array of pointers to the nodes in this device

struct icc_provider

interconnect provider (controller) entity that might provide multiple interconnect controls

Definition

struct icc_provider {
  struct list_head        provider_list;
  struct list_head        nodes;
  int (*set)(struct icc_node *src, struct icc_node *dst);
  int (*aggregate)(struct icc_node *node, u32 tag, u32 avg_bw, u32 peak_bw, u32 *agg_avg, u32 *agg_peak);
  void (*pre_aggregate)(struct icc_node *node);
  int (*get_bw)(struct icc_node *node, u32 *avg, u32 *peak);
  struct icc_node* (*xlate)(struct of_phandle_args *spec, void *data);
  struct icc_node_data* (*xlate_extended)(struct of_phandle_args *spec, void *data);
  struct device           *dev;
  int users;
  bool inter_set;
  void *data;
};

Members

provider_list

list of the registered interconnect providers

nodes

internal list of the interconnect provider nodes

set

pointer to device specific set operation function

aggregate

pointer to device specific aggregate operation function

pre_aggregate

pointer to device specific function that is called before the aggregation begins (optional)

get_bw

pointer to device specific function to get current bandwidth

xlate

provider-specific callback for mapping nodes from phandle arguments

xlate_extended

vendor-specific callback for mapping node data from phandle arguments

dev

the device this interconnect provider belongs to

users

count of active users

inter_set

whether inter-provider pairs will be configured with set

data

pointer to private data

struct icc_node

entity that is part of the interconnect topology

Definition

struct icc_node {
  int id;
  const char              *name;
  struct icc_node         **links;
  size_t num_links;
  struct icc_provider     *provider;
  struct list_head        node_list;
  struct list_head        search_list;
  struct icc_node         *reverse;
  u8 is_traversed:1;
  struct hlist_head       req_list;
  u32 avg_bw;
  u32 peak_bw;
  u32 init_avg;
  u32 init_peak;
  void *data;
};

Members

id

platform specific node id

name

node name used in debugfs

links

a list of targets pointing to where we can go next when traversing

num_links

number of links to other interconnect nodes

provider

points to the interconnect provider of this node

node_list

the list entry in the parent provider’s “nodes” list

search_list

list used when walking the nodes graph

reverse

pointer to previous node when walking the nodes graph

is_traversed

flag that is used when walking the nodes graph

req_list

a list of QoS constraint requests associated with this node

avg_bw

aggregated value of average bandwidth requests from all consumers

peak_bw

aggregated value of peak bandwidth requests from all consumers

init_avg

average bandwidth value that is read from the hardware during init

init_peak

peak bandwidth value that is read from the hardware during init

data

pointer to private data

Interconnect consumers

Interconnect consumers are the clients which use the interconnect APIs to get paths between endpoints and set their bandwidth/latency/QoS requirements for these interconnect paths. These interfaces are not currently documented.

Interconnect debugfs interfaces

Like several other subsystems interconnect will create some files for debugging and introspection. Files in debugfs are not considered ABI so application software shouldn’t rely on format details change between kernel versions.

/sys/kernel/debug/interconnect/interconnect_summary:

Show all interconnect nodes in the system with their aggregated bandwidth request. Indented under each node show bandwidth requests from each device.

/sys/kernel/debug/interconnect/interconnect_graph:

Show the interconnect graph in the graphviz dot format. It shows all interconnect nodes and links in the system and groups together nodes from the same provider as subgraphs. The format is human-readable and can also be piped through dot to generate diagrams in many graphical formats:

$ cat /sys/kernel/debug/interconnect/interconnect_graph | \
        dot -Tsvg > interconnect_graph.svg